[1]孟宪举*,赵瑞朝.抹灰机联动机构优化设计[J].山东建筑大学学报,2020,(01):83-88.[doi:10.12077/sdjz.2020.01.013]
 MENG Xianju*,ZHAO Ruichao.Optimum design of linkage mechanism of plastering machine[J].Journal of Shandong jianzhu university,2020,(01):83-88.[doi:10.12077/sdjz.2020.01.013]
点击复制

抹灰机联动机构优化设计()
分享到:

《山东建筑大学学报》[ISSN:1673-7644/CN:37-1449/TU]

卷:
期数:
2020年01期
页码:
83-88
栏目:
工程实践
出版日期:
2020-02-15

文章信息/Info

Title:
Optimum design of linkage mechanism of plastering machine
文章编号:
1673-7644(2020)01-0083-06
作者:
孟宪举*赵瑞朝
(山东建筑大学 机电工程学院,山东 济南 250101)
Author(s):
MENG Xianju* ZHAO Ruichao
(School of Mechanical and Electronic Engineering, Shandong Jianzhu University, Jinan 250101, China)
关键词:
抹灰机联动机构优化设计
Keywords:
plastering machine linkage mechanism optimal design
分类号:
TH122
DOI:
10.12077/sdjz.2020.01.013
文献标志码:
A
摘要:
在建筑装修工程中,墙面抹灰是一项工程量大、质量要求严格的工程,抹灰机可以有效地提高工作效率、节约成本。抹灰机联动机构将抹灰板、抹灰料斗与机体连接起来,对其进行优化设计是决定抹灰效果的关键。文章确定出联动机构的基本结构,绘制出联动机构二维图,采用MATLAB软件编制优化程序进行杆长优化设计,并通过SolidWorks软件三维建模后,导入至ADAMS软件中进行运动学分析。结果表明:设计的联动机构可以将抹灰料斗和抹灰板很好的联动起来,完成目标动作,保证抹灰效果符合工作要求;优化杆长尺寸后,在ADAMS软件中进行模拟分析,发现联动机构与抹灰板连接处的竖直位移<1 mm,满足误差要求。
Abstract:
In the construction and renovation project, the plastering project has large quantities of works and strict quality requirement. The plastering machine can meet the work requirements and improve the work efficiency. The plastering machine linkage mechanism connects the plastering board and the plastering hopper with the body, and completes a series of work such as automatic feeding, plastering and calendering in the plastering process. The optimal design of linkage mechanism of plastering machine is the key to determine the effect of plastering. According to the working requirements, the basic structure of the linkage mechanism is determined, and the two-dimensional graph of the linkage mechanism is drawn. The optimization program is compiled by MATLAB software to optimize the length of the linkage. After three-dimensional modeling by SolidWorks software, it is imported into ADAMS software for kinematics analysis. The results show that: The linkage mechanism can link the plastering hopper and the plastering board well to complete the target action. When the length of rod is optimized, simulation analysis is carried out in Adams. The vertical displacement at the joint of linkage mechanism and plastering board is less than 1 mm. It can meet the error requirement and ensure the plastering effect.

参考文献/References:

[1]刘维忠,谢守勇,王靖.智能墙体抹灰机研究[J].重庆建筑,2012,11(4):47-48. [2]王莹,谢守勇,王靖.一种新型抹灰机的设计和仿真[J].西南师范大学学报(自然科学版),2012,37(11):112-115. [3]王凯.新型抹灰机的设计与分析[D]. 济南:山东建筑大学,2016. [4]张孝文.新型抹灰机动力学分析与结构优化设计[D].济南:山东建筑大学,2017. [5]Bhandari S J, Chavan N V, Bhoite M R, et al. Automatic plastering machine[J]. International Journal for Research in Engineering Application & Management , 2018,4(2):545-548. [6]孟宪举,王凯,张莹,等.抹灰机抹灰装置的设计与动力仿真分析[J].建筑技术,2015,46(S1):85-87. [7]龙腾,李恩,方灶军,等.智能墙面抹灰机的类型及关键技术研究进展[J].山东建筑大学学报,2015,30(1):65-70. [8]张孝文,潘首剑,周广县.一种新型自动抹灰机设计与创新研究[J].中国新技术新产品,2016,12(24):13-14. [9]冯爱华,范春起.室内墙壁用差动抹灰机研究[J].施工技术,2014,43(9):95-98. [10]王飞,邢进,赵华文.一种新型抹灰机的结构设计[J].机电产品开发与创新,2014,27(3):72-73. [11]阮学云,马强强, 李红伟,等.一种气动内墙智能抹灰机设计与研究[J].机床与液压,2017,45(9):29-31. [12]周昇,郭光宜.基于MATLAB的六杆推料机构多目标优化设计[J].机械工程师,2014(11):133-136. [13]赵春雨,孟宪举,李军.大公称力行程冷挤压机肘杆机构的优化分析[J].机械设计与制造,2011(9):176-178. [14]温正.MATLAB科学计算[M].北京:清华大学出版社,2017. [15]彭传富.谈挤压式抹墙机在建筑施工中的应用[J].安徽建筑,2018,26(3):117-118,123. [16]吕鲲,袁扬.基于ADAMS的六杆机构运动学及动力学仿真分析[J].河南理工大学学报(自然科学版),2012,31(5):555-560.

备注/Memo

备注/Memo:
收稿日期:2020-01-03 作者简介:孟宪举(1964-),男,教授,博士,主要从事机构学与机械动力学等方面的研究.E-mail:714067374@qq.com[*通讯作者]
更新日期/Last Update: 2020-01-18