[1]韩强,徐薇,韩敬钦.电厂污染水源处理工艺的选择及设计[J].山东建筑大学学报,2010,(05):558-562.
 HAN Qiang,XU Wei.Treatment process selection and design of the polluted water sources for the power plant[J].Journal of Shandong jianzhu university,2010,(05):558-562.
点击复制

电厂污染水源处理工艺的选择及设计()
分享到:

《山东建筑大学学报》[ISSN:1673-7644/CN:37-1449/TU]

卷:
期数:
2010年05期
页码:
558-562
栏目:
工程实践
出版日期:
2010-10-15

文章信息/Info

Title:
Treatment process selection and design of the polluted water sources for the power plant
作者:
韩强1徐薇2韩敬钦1
1.山东电力工程咨询院有限公司,山东 济南 250013;2. 济南市市政工程设计研究院有限责任公司,山东 济南,250101
Author(s):
HAN Qiang1 XU Wei2
1. Shandong Electric Power Engineering Consulting Institute Co.Ltd., Jinan, Shandong 250014; 2.Jinan Municipal Engineering Design & Research Institute Co., Ltd. , Jinan, Shandong 250101
关键词:
污染水源处理工艺设计参数
Keywords:
polluted water sources treatment process design parameters
分类号:
TU991.27
文献标志码:
A
摘要:
对巴西某电厂水源的处理进行了研究,针对水源中BOD含量较高的情况,通过比较不同处理工艺的特点,确定采用絮凝沉淀池+曝气生物滤池的组合工艺进行处理,并通过调整工艺流程,使其能满足BOD最高313.8mg/L、最低5.1mg/L的不同进水质。最后,对处理工艺各组成部分的主要设计参数进行了选取。
Abstract:
This paper studies the treatment of the polluted water sources for a power plant of Brazil. In view of the higher content of BOD in the water sources, several different treatment processes are compared, then the combined process of coagulant sedimentation tank and BAF is adopted. The process is adjusted to satisfy the maximum BOD value of 313.8mg/l and the minimum BOD value of 5.1mg/l. Finally, the main design parameters of every component of the treatment process are selected.

相似文献/References:

[1]吴中杰,*,李燕,等.高浓度酯类废水处理工艺优化设计研究[J].山东建筑大学学报,2018,(04):7.[doi:10.12077/sdjz.2018.04.002]
 Wu Zhongjie,*,Li Yan,et al.Research on optimization design for high concentrations ester wastewater treatment[J].Journal of Shandong jianzhu university,2018,(05):7.[doi:10.12077/sdjz.2018.04.002]

更新日期/Last Update: 2010-12-02