[1]姜洪奎,宋现春,李彦凤,等.滚珠丝杠副磨损失效机理研究进展[J].山东建筑大学学报,2015,(2):163-169.
 Jiang Hongkui,Song Xianchun,Li Yanfeng,et al.Review on the wear failure of ball screw mechanism[J].Journal of Shandong jianzhu university,2015,(2):163-169.
点击复制

滚珠丝杠副磨损失效机理研究进展
()
分享到:

《山东建筑大学学报》[ISSN:1673-7644/CN:37-1449/TU]

卷:
期数:
2015年2期
页码:
163-169
栏目:
综合述评
出版日期:
2015-04-15

文章信息/Info

Title:
Review on the wear failure of ball screw mechanism
作者:
姜洪奎宋现春李彦凤李丽高山龙马洪君宋义顺
山东建筑大学机电工程学院,山东济南250101
Author(s):
Jiang Hongkui Song Xianchun Li Yanfeng et al.
School of Mechanical and Electrical Engineering, Shandong Jianzhu University, Jinan 250101, China
关键词:
滚珠丝杠磨损失效机理失效诊断
Keywords:
ball screw wear failure mechanism failure diagnosis
分类号:
TH132.
文献标志码:
A
摘要:
在机床、航空航天、自动化等领域的机械传动系统中,滚珠丝杠副存在使用寿命短、温升过快、可靠性差、磨损失效快等一系列问题,对滚珠丝杠副的磨损失效机理进行系统、深入的分析尤为重要。文章分析了滚珠丝杠副的接触力学和摩擦力学的特点,从磨损失效形式、磨损理论模型、材料性能及失效诊断方法等四个方面对目前滚珠丝杠副磨损失效的研究现状进行了评述,指出了滚珠丝杠副磨损失效亟待解决的问题。
Abstract:
There are a series of technical problems in the application of the ball screw mechanism in the machine tool, aerospace and automation field, such as short service life, thermal effects, poor reliability and high wear rate. Therefore, it is necessary to make systematic analysis and intensive review of the wear failure of ball screw mechanism. The characteristics of contact mechanics and frictional mechanics of the ball screw mechanism are summarized. The retrospection of the development history and status of the wear failure of ball screw is summarized and commented form the aspects of failure mode, wear model, material performance and diagnosis. Finally the key problem of solving the wear failure of ball screw is presented.

相似文献/References:

[1]李汉伟,宋现春,许向荣,等.RS485局域网络在滚珠丝杠补偿加工系统中的应用研究[J].山东建筑大学学报,2009,(02):107.
 LI Han-wei,SONG Xian-chun,XU Xiang-rong,et al.Research on the RS485 LAN used in the system of compensation machining for ball screw[J].Journal of Shandong jianzhu university,2009,(2):107.
[2]苏谦,张明勤,张春玲,等.TRIZ冲突解决原理在辊压机磨损和粉磨工艺中的应用[J].山东建筑大学学报,2010,(04):414.
 SU Qian,ZHANG Ming-qin,ZHANG Chun-ling,et al.Application of TRIZ conflict resolving theory in roller mill’s wear and grinding process[J].Journal of Shandong jianzhu university,2010,(2):414.
[3]唐文成,宋现春,姜洪奎,等.基于ANSYS的滚珠丝杠反向器参数化建模分析[J].山东建筑大学学报,2010,(05):481.
 TANG Wen-cheng,SONG Xian-chun,JIANG Hong-kui,et al.Parametric analysis of the model of the reflector of ball screw based on ANSYS[J].Journal of Shandong jianzhu university,2010,(2):481.
[4]刘少辉 李彦凤 宋现春 姜洪奎.移动热源在旋风硬铣丝杠温度场仿真中的应用[J].山东建筑大学学报,2012,(05):483.
 LIU Shao-hui,LI Yan-feng,SONG Xian-chun,et al.Application of moving heat source to the temperature field simulation of ball-screw whirlwind milling[J].Journal of Shandong jianzhu university,2012,(2):483.
[5]李彦凤1,2,马洪君1,等.基于BP神经网络的丝杠硬旋铣热伸长研究[J].山东建筑大学学报,2014,(06):530.
 Li Yanfeng,Ma Hongjun,et al.Thermal elongation prediction of whirlwind hard milling ballscrew based on BP neural network[J].Journal of Shandong jianzhu university,2014,(2):530.
[6]宋现春,姜洪奎,李彦凤,等.滚珠丝杠副返向器磨损的动力学仿真分析研究[J].山东建筑大学学报,2016,(06):571.
 Song Xianchun,Jiang Hongkui,Li Yanfeng,et al.Study on Influence of ball screw by reverse device abrasion wear on dynamic performance[J].Journal of Shandong jianzhu university,2016,(2):571.

更新日期/Last Update: 2015-05-01