[1]王忠雷1,2,程钢1,等.SolidWorks二次开发在机械学科毕业设计中的应用[J].山东建筑大学学报,2014,(06):601-604.
 Wang Zhonglei,Cheng Gang,et al.Application of secondary development of SolidWorks in mechanical engineering graduation project[J].Journal of Shandong jianzhu university,2014,(06):601-604.
点击复制

SolidWorks二次开发在机械学科毕业设计中的应用
()
分享到:

《山东建筑大学学报》[ISSN:1673-7644/CN:37-1449/TU]

卷:
期数:
2014年06期
页码:
601-604
栏目:
出版日期:
2014-12-15

文章信息/Info

Title:
Application of secondary development of SolidWorks in mechanical engineering graduation project
作者:
王忠雷程钢袁文生王晓丽
1.山东建筑大学机电工程学院,山东 济南 250101;2.山东省高校机械工程创新技术重点实验室,山东 济南 250101;3.齐鲁工业大学机械与汽车工程学院,山东 济南 250353
Author(s):
Wang Zhonglei 1 2 Cheng Gang 1 2 Yuan Wensheng 1 2 et al.
1. School of Mechanical and Electronic Engineering, Shandong Jianzhu University, Jinan 250101, China; 2. Key Laboratory of Mechanical Engineering & Innovation Technology in Universities of Shandong, Jinan 250101, China
关键词:
Solidworks二次开发毕业设计
Keywords:
SolidWorks secondary development graduation project
分类号:
G642
文献标志码:
A
摘要:
目前在本科教学中对三维CAD软件的课堂教学和实践训练,一般都集中在应用软件进行造型、装配和加工代码生成。随着CAD软件技术应用的深入,通用的CAD软件难以满足所有行业的要求,CAD软件进行二次开发,已经成为CAD软件深入应用的有效途径。文章分析机械学科毕业设计的现状及问题,阐述了CAD二次开发的技术基础,提出了二次开发技术在毕业设计中的应用途径。并对CAD软件二次开发技术在机械学科毕业设计中的应用实例进行分析,通过教学实践证明了这一创新实践教学的可行性和效果。
Abstract:
The undergraduate teaching about the threedimensional CAD software was focused on learning and training modeling, assembly and generation of processing code. With the deepening of CAD application, CAD software is difficult to meet the requirementsof all industries. A secondary development of the CAD software according to enterprises characteristics and requirement, has become the effective way for the application of CAD software. In this paper, the current situation and problems of mechanical subject of graduation design was analyzed, a secondary development of the CAD software was described and the way of application secondary development technology of CAD in graduation design was proposed. The application examples of the secondary development technology of CAD software were analyzed in mechanical engineering graduate design and the teaching practice?proves the feasibility and effect of the innovative practice teaching.

相似文献/References:

[1]魏欣,刘希玉,牛雪丽.基于CATIA二次开发的帆船酒店造型设计[J].山东建筑大学学报,2009,(06):510.
 WEI Xin,LIU Xi-yu,NIU Xue-li.Shape designing of Burj Al Arab hotel using secondary development in CATIA[J].Journal of Shandong jianzhu university,2009,(06):510.
[2]崔纪鹏,*,冯虎.路基路面工程辅助计算程序二次开发及实现[J].山东建筑大学学报,2018,(06):31.[doi:10.12077/sdjz.2018.06.006]
 Cui Jipeng,*,Feng Hu.Development and implementation of auxiliary calculation software for subgrade pavement engineering[J].Journal of Shandong jianzhu university,2018,(06):31.[doi:10.12077/sdjz.2018.06.006]

更新日期/Last Update: 2015-02-01